DigiFlex® Performance™

digital servo drives

The combination of a DigiFlex® Performance™ servo drive with the DriveWare software establishes a new benchmark in versatility!

Select a series to view models:
Panel Mount: DPR series - RS485/232 DPC series - CANopen DPQ series - SynqNet®	Z-Drives (plug-in): DZR series - RS485/232 DZC series - CANopen

Capabilities

Capabilities built into DigiFlex® servo drives include:

• Full tuning control of Position, Velocity and Torque loops
• Real-time oscilloscope with up to 8 channels to ensure that tuning achieves the highest performance
• Status window with over 50 simultaneous channels for drive and system diagnostics
• I/O configuration for over 60 events and signals, configurable to latch/non-latch as well as active-high and active-low
• Universal servo motor compatibility by means of automatic commutation adjustment
• Dual loop feedback and control - increases stability and accuracy.
• Stand-alone or network configuration

 

 

Take a close look at the picture on the left

Do you notice how the servo drive is in the middle of everything? In fact, out of all of the components in a typical motion control system, the servo drive is the only one that is in direct interaction with everything else. When designing a motion control system, all of the parts need to work together and one of the easiest ways to simplify integration is to have a lot of options when it comes to choosing a servo drive.

With DigiFlex® Performance™ we provide an abundance of features intended to address your every need and make your job easier. This is why we like to say "Any Controller, Any Motor, Any Feedback"...

Any Controller

DigiFlex® Performance™ servo drives can be controlled over the network as well as off the network using traditional +/-10V analog commands, Step & Direction, PWM & Direction and more. Configuration is achieved with a PC and the DriveWare software, and once configured the type of control is flexible to the user.

Networks: Choosing the right network depends on a variety of factors such as required bandwidth, update rate, performance, and cost. The network options supported by DigiFlex® Performance™ are: RS485 / RS232 CANopen SynqNet® How to choose the right network for your system

Command: Network Command +/- 10V Step & Direction (5VTTL, 24V) Encoder Following (Electronic Gearing) PVT (Network Efficient Command Protocol) PWM & Direction

Any Motor

Every drive in the DigiFlex® Performance™ family can drive these motors. Switching motor types is as easy as picking one from a drop-down in the DriveWare software.

• Brush
• Brushless
• Rotary
• Linear
• Voice Coil
• Closed Loop Vector

Any Feedback

The DigiFlex® Performance™ family includes drives capable of using any of these types of feedback:

• TTL Encoder
• sin/cos - 1Vpp (Absolute, EnDat & Hiperface)
• sin/cos - 1Vpp (Incremental with Hall sensors)
• Resolver with 12 & 14 bit selectable resolution. 10 & 16 bit versions optional
• Hall Sensor
• Tachometer (±10V)
• Analog Position (position pot, LVDT)