DPQ series
Digiflex® Performance™, SynqNet®, Panel Mount
The DigiFlex® Performance™ (DP-Family) digital servo drives with SynqNet® offer full centralized control to achieve the highest performance for your application. Built on a 100BT physical layer, SynqNet® provides a synchronous real-time connection between motion controllers, servo drives, I/O modules, and custom devices.
The DPQ-series is part of our Digiflex® Performance™ family. Please see our Digiflex® Performance™ page to see all options.
- Encoder
- Overview
- Downloads & Support
Encoder Feedback |
|
These drives support 5V incremental encoder feedback. Encoders provide incremental position feedback that can be extrapolated into very precise velocity or position information. Hall sensors are recommended for initial commutation, but are not required. These drives can be configured to run without Halls by using "Phase Detect" on startup (Wake & Shake). |
Can't find exactly what you need? Consider a modified or custom solution...
Model Number |
Power |
Command Signal |
Inputs and Outputs |
||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Voltage (V) |
Rated (kW) |
Current (A) |
±10V |
Step |
Enc |
PWM |
Network |
Analog |
Digital 5V |
Digital 24V |
|||||||||
AC |
Φ† |
DC |
Logic* |
Peak |
Cont. |
Peak |
Cont. |
In |
Out |
In |
Out |
In |
Out |
||||||
| < sort > | |||||||||||||||||||
| {Model} | {InputVoltageACLow} - {InputVoltageACHigh} | {PhiTable} | {InputVoltageDCLow} - {InputVoltageDCHigh} | {ExternallySuppliedLogic} | {Peak_Power} | {Cont_Power} | {Peak_Current} | {Cont_Current} | {AnalogInputs} | {AnalogOutputs} | {DigitalInputs5V} | {DigitalOutputs5V} | {DigitalInputs24V} | {DigitalOutputs24V} | |||||
† For AC input voltage, 3ph drives powered via 1ph reduces peak/continuous current ratings by ~30%.
* Logic Supply Voltage. 'U' is Universal - see datasheet for expanded logic supply voltage range.
 |
|
|---|---|
Network |
SynqNet - For drive communication and control. A high performance network that uses the 100baseT physical layer. High communication rates allow this centralized control network to coordinate up to 32 nodes. |
Setup |
SynqNet - Setup configuration with DriveWare software. |
Motors |
All models compatible with - Brushless, Brushed, Linear, Rotary, Voice Coil, Inductive Load, Closed Loop Vector (AC Induction). |
Feedback |
TTL Encoder - 5V incremental encoder feedback. Encoders are used for velocity and position mode feedback as well as sinusoidal commutation for brushless motors. |
Power |
DC Voltage Range: 20 - 750 VDC AC Voltage Range: 100 - 480 VAC |
Command Source |
SynqNet - A high performance network that uses the 100baseT physical layer. High communication rates allow this centralized control network to coordinate up to 32 nodes. |
I/O |
Events and Signals - Analog and Digital I/O can be configured for over 60 events and signals. Analog - See individual drive specification for resolution and quantity. Digital (TTL) - See individual drive specifications for quantity. Digital (24V) - See individual drive specifications for quantity. |
Mode |
Torque - The input command controls the output current (torque). The servo drive will adjust to disturbances and maintain the commanded current. This is the suggested mode if an external controller is used which can close the velocity or position loops. |
