DPRAHIE-030A400
Panel Mount
DigiFlex Performance (Reserved)
Product Status:
Reserved
Specifications
Current Continuous (A)
15
Current Peak (A)
30
DC Supply Voltage (VDC)
127 - 373
AC Supply Voltage (VAC)
100 - 240
Network Communication
Modbus RTU, RS-485/232
Size (mm)
202.1 x 156.8 x 69.5
Weight (g)
1722
The DPRAHIE-030A400 is a reserved product and is only available as a replacement in existing applications. Support information for this servo drive can be found on the Reserved and Discontinued page
CONTROL/COMMAND
- ±10 V Analog
- Step & Direction (24V)
- Encoder Following
- Indexing
- Jogging
- Over the Network
- PWM and Direction
- Sequencing
PRIMARY FEEDBACK
- ±10 VDC Position
- Halls
- Incremental Encoder
- Tachometer (±10 VDC)
OPERATING MODE
- Current
- Hall Velocity
- Position
- Velocity
MOTOR TYPE
- Three Phase (Brushless)
- Single Phase (Brushed)
- AC Induction
- Stepper
PRODUCT DOWNLOADS
DPRAHIE-030A400 Datasheet
Zipped folder containing STP, IGS, SLDPRT, STL, and 3D PDF models.
- DP Panel Mount (Modbus RTU/RS485) HW Installation Manual Installation of DigiFlex® Performance™ RS485-ModbusRTU servo drives
- Modbus Communication Manual (DP) Modbus Communication and Register Definitions for DigiFlex® Performance™ servo drives
- RS485 Communication Manual (DP) RS485 / 232 Communication and Object Dictionary for DigiFlex® Performance™ servo drives
- Product Identification Determine the part number, serial number and version of your product
- DriveWare® 7 Quick Reference Quick start-up guide for DriveWare® 7
- DriveWare® 7 Release Notes Release notes for latest version of DriveWare® 7 software
- DriveWare® 7 Software Configuration software for DigiFlex® Performance™ digital servo drives
- DriveWare® 7 User Manual User Manual for DriveWare® 7 software
- App Note 001 Performance and benefits comparison between CANOpen, RS232
- App Note 003 DigiFlex® Performance™ Drive Peak Current Recovery
- App Note 006 RS485 / 232 Communication protocol examples
- App Note 013 RS485 / 232 Command Profiler
- App Note 023 Ferrite Recommendations
- App Note 026 Serial Example for RS-485/232 Profile Position Moves
- App Note 027 Motion Engine, configure internal motion generator for indexing and sequences
- App Note 028 Mode Switching, hot switch between modes and gain settings for select digital drives
- App Note 030 AC Induction Current Loop Tuning
- App Note 034 Programmable Limit Switch (PLS) Examples
- App Note 035 Sequencing Overview and Examples
- App Note 036 RS485/232 Communication Tutorial - Docklight
- App Note 037 Stepper Motor Setup Process
- App Note 039 Connectivity Between Dynomotion and ADVANCED Motion Controls' Servo Drives
- App Note 041 DigiFlex® Performance™ Drives in High-Speed Applications
- App Note 050 Troubleshooting USB and RS232 Connection Issues
- DriveWare® 7 AutoCommutation Commutate a brushless motor using the DriveWare® 7 Autocommutation feature
- DriveWare® 7 Current Loop Tuning Tune the current loop on DigiFlex® Performance™ servo drives
- DriveWare® 7 Overview Basic overview of DriveWare® 7 configuration software
- Outer Loop Tuning Configuring Position around Velocity and Position around Current with a DigiFlex® Performance™ Servo Drive
- Proper Wiring Practices Tips for Proper Wiring and Reducing EMI (Noise)
- CE CE for both Class A Electromagnetic Compatibility and LVD
- ISO 9001 Process Quality compliance with ISO 9001:2015 standards
- REACh Regulation, Evaluation and Authorization of Chemicals
- RoHS III RoHS (Reduction of Hazardous Substances)
- UL UL file number E140173 for US and Canadian safety compliance
- CMRT Declaration for Conflict Mineral Reporting
Thank You For Requesting Access
To view the requested file, please click the button below.
Begin Download