Advanced Motion Controls

Advanced Motion Controls has a variety of power supplies to power your servo drive. Sizes range from 300W continuous to over 35kW peak power. Selecting the correct power supply is as simple as specifying the correct voltage and picking a model that can supply enough power.

In addition to voltage and power, isolation is a very important consideration. For safe and reliable operation, either the drive or the power supply must have isolation. In the drive, isolation takes the form of optical isolators that isolate the signal ground from the power ground. In the power supply, isolation takes the form of an isolation transformer that isolates the input AC from the power supply output.

If the drive datasheet does not specify optical isolation then you must use a power supply with an isolation transformer.

PS50A and PS30A

240VAC three phase input

Model	Voltage	Current (A)	Power (W)	Isolation	Notes	Options*
PS30A	340VDC	30	10000	No	Built-In shunt regulator clamps voltage to 390VDC. Derate current rating by 50% for single phase AC input.	-LV
PS50A	340VDC	50	17000	No		-LV
*Options	-LV: Low voltage option. Built-In shunt regulator set to 190VDC.

PS1600 Series

120VAC single phase input.

Model	Voltage	Current (A)	Power (W)	Isolation	Notes	Options*
PS16L30	30VDC	27	800	Yes	Mounting area provided for up to 6 drives.	-L
PS16L36	36VDC	22	800	Yes	Mounting area provided for up to 6 drives.	-L
PS16L40	40VDC	20	800	Yes	Mounting area provided for up to 6 drives.	-L
PS16L60	60VDC	13	800	Yes	Mounting area provided for up to 6 drives.	-L
PS16L72	72VDC	11	800	Yes	Mounting area provided for up to 6 drives.	-L
PS16L80	80VDC	10	800	Yes	Mounting area provided for up to 6 drives.	-L
PS16L120	120VDC	7	800	Yes	Mounting area provided for up to 6 drives.	-L
PS16L160	160VDC	5	800	Yes	Mounting area provided for up to 6 drives.	-L
PS16L170	170VDC	15	2550	No	Mounting area provided for up to 6 drives.	-L
*Options	-L: Power Supply mounted to an 'L' shaped bracket for smaller size. With this option space is not provided to mount drives to the power supply. Add '-L' at the end of these part numbers to indicate the '-L' option. Example: PS16L30-L

240VAC single phase input

Model	Voltage	Current (A)	Power (W)	Isolation	Notes	Options*
PS16H30	30VDC	27	800	Yes	Mounting area provided for up to 6 drives.	-L
PS16H36	36VDC	22	800	Yes	Mounting area provided for up to 6 drives.	-L
PS16H40	40VDC	20	800	Yes	Mounting area provided for up to 6 drives.	-L
PS16H60	60VDC	13	800	Yes	Mounting area provided for up to 6 drives.	-L
PS16H72	72VDC	11	800	Yes	Mounting area provided for up to 6 drives.	-L
PS16H80	80VDC	10	800	Yes	Mounting area provided for up to 6 drives.	-L
PS16H120	120VDC	7	800	Yes	Mounting area provided for up to 6 drives.	-L
PS16H160	160VDC	5	800	Yes	Mounting area provided for up to 6 drives.	-L
Options*	-L: Power Supply mounted to an 'L' shaped bracket for smaller size. With this option space is not provided to mount drives to the power supply. Add '-L' at the end of these part numbers to indicate the '-L' option. Example: PS16L30-L

PS300 Series

120VAC single phase input

Model	Voltage	Current (A)	Power (W)	Isolation	Notes	Options*
PS300W24	24VDC	12	300	Yes
PS300W48	48VDC	6	300	Yes
PS300W72	72VDC	3	220	Yes
PS300W96	96VDC	3	300	Yes
PS300W170	170VDC	15	2550	No

240VAC single phase input

Model	Voltage	Current (A)	Power (W)	Isolation	Notes	Options*
PS300H24	24VDC	12	300	Yes
PS300H48	48VDC	6	300	Yes
PS300H72	72VDC	3	220	Yes
PS300H96	96VDC	3	300	Yes

PS2X300 and PS4X300 Series

These power supplies are similar to the PS300 Series but they are enclosed in a metal case.

120VAC single phase input, transformer enclosed in a metal case.

Model	Voltage	Current (A)	Power (W)	Isolation	Notes	Options*
PS2X3W24	24VDC	12	300	Yes	Mounting area provided for up to 2 drives
PS4X3W24	24VDC	12	300	Yes	Mounting area provided for up to 4 drives
PS2X3W48	48VDC	6	300	Yes	Mounting area provided for up to 2 drives
PS4X3W48	48VDC	6	300	Yes	Mounting area provided for up to 4 drives
PS2X3W72	72VDC	3	220	Yes	Mounting area provided for up to 2 drives
PS2X3W96	96VDC	3	300	Yes	Mounting area provided for up to 2 drives

240VAC single phase input, transformer enclosed in a metal case.

Model	Voltage	Current (A)	Power (W)	Isolation	Notes	Options*
PS2X3H24	24VDC	12	300	Yes	Mounting area provided for up to 2 drives
PS2X3H48	48VDC	6	300	Yes	Mounting area provided for up to 2 drives
PS4X3H48	48VDC	6	300	Yes	Mounting area provided for up to 4 drives
PS2X3H72	72VDC	3	220	Yes	Mounting area provided for up to 2 drives
PS2X3H96	96VDC	3	300	Yes	Mounting area provided for up to 2 drives