News & Events

Latest news from ADVANCED Motion Controls including:

  • Our latest product announcements and releases
  • Trade shows and events where we are participating
  • Other company news

 

Introducing 60 Amps Continuous Micro-Sized FlexPro Servo Drives

We’ve been approached at Trade Shows regarding FlexPro. People have asked, “You can’t really run that much current through that tiny servo drive, can you?” To which we like to reply, “Yes we can, and soon we’ll be able to do even more.” That’s right, we’ve broken our record for power density once again. Our

Read More...

Visit Us at the A3 Autonomous Mobile Robots & Logistics Conference

Trade Shows are back! Join us at the A3 Autonomous Mobile Robots & Logistics Conference in Memphis, Tennessee this October. Learn about the latest in AMR (Autonomous Mobile Robot) technology and how they can create more efficient warehouses, factories, and other facilities. See presentations, meet with industry professionals, and of course visit the exhibition with

Read More...

RS485/RS232 FlexPro Servo Drives are Here!

Can you believe we’re already at the half-way point of 2021?  As a continuation of our rapid expansion of new products we are excited to launch 9 new models. The new models introduce RS485 and RS232 communication to our FlexPro® servo drive family.  This makes RS485/232 the fourth network that we offer in addition to

Read More...

Meet Our Newest Distributor, SACA Europe!

We’d like to introduce our newest sales partner, SACA Europe! SACA will be representing us and serving customers in Austria, Germany, and Switzerland! What Makes SACA special? SACA Europe was founded in 2018 by individuals with over three decades of experience in electronics components distribution. They offer power devices, embedded computers, sensors, motors, controls, and

Read More...

New 100 Amps Peak FlexPro Servo Drives Available!

Okay, sometimes a little bigger is better. Now joining our FlexPro family are the first of our “Mini”-sized servo drives. With a slight size increase, these drives can output over double the current and run on higher voltage than our existing micro-sized FlexPro drives. Quick Specs 50 amps continuous! 100 amps peak! 20-90 VDC supply!

Read More...

WEBINAR: How to Get from Good to Great in Mobile Robotics and Mobile Applications

Watch the Recording! We’re partnering with Motus Labs to put on a webinar on How to Get from Good to Great in Mobile Robotics and Mobile Applications. The right servo drive can make the difference in getting the most performance from your cobot, mobile robot, or battery-powered application. Modern servo drives are smaller than ever

Read More...

EtherNet/IP now available for FlexPro Servo Drives

With the release of two new products, not only have we added panel mount servo drives to our FlexPro® family, but we’ve also added Ethernet/IP to our growing list of supported network protocols at ADVANCED Motion Controls. The FMP060-25-IPM is the first of our off-the-shelf standard products to have EtherNet/IP communication, but it certainly won’t

Read More...

45 Amp Continuous FlexPro® drives released!

“Scotty, we need more power!” You got it. Introducing 45 amp continuous FlexPro servo drives. These drives have no peak current rating; they can safely run continuously at the full 45 amps. We’re offering this new power level in compact PCB mount servo drives for both CANopen and EtherCAT networks. Also available for both networks

Read More...

New CANopen Extended Environment FlexPro® Drives!

We’ve added six new CANopen servo drives with Extended Environment capabilities to our FlexPro® line! These come in addition to our existing EtherCAT Extended Environment FlexPro drives. Extended Environment servo drives are meant to push boundaries, operating properly in conditions where many other electronics fail. They can withstand both scorching and freezing temperatures, high and

Read More...

Delta Robot Control – See why igus chose Click&Move and ADVANCED Motion Controls

A delta robot (or deltabot) is a versatile style of robot used for a variety of applications. It uses three belt-driven linear actuators to move six pivoting rods that control the path of a central effector plate where tools can be attached. igus Inc. partnered with ADVANCED Motion Controls, using our servo drives and Click&Move

Read More...