Reserved and Discontinued

Reserved products can only be purchased for existing applications. Technical support is limited.

Discontinued products are no longer manufactured and are not available for purchase. Technical support is very limited or unavailable.

For assistance in migrating from a Reserved or Discontinued product to an Active product, please contact Technical Support for help in selecting a comparable product. Active models take advantage of newer technology, and in general are more cost effective, reliable, smaller, and more powerful than older models.

The following downloads are available for general support for reserved and discontinued products and may or may not be relevant to your particular product

Hardware Downloads
AxCent Retrofit - Small Size
Replace classic analog drives with new AxCent™ models - small size
AxCent Retrofit - Large Size
Replace classic analog drives with new AxCent™ models - large size
Product Identification
Determine the part number, serial number and version of your product
Classic Analog Drives HW Manual
Hardware installation manual for classic analog servo drives
App Note 007
Operate a brushed motor with a brushless drive
App Note 009
Troubleshooting a red LED - classic analog drives
App Note 011
Classic analog drives configuration and setup
App Note 014
Commutation Phasing Worksheet
App Note 015
Current Loop Tuning Procedure
App Note 016
Classic analog drives current limits
Software Downloads

ADVANCED Motion Controls recommends only using the latest version of software and firmware. Older versions are made available for the convenience of customers that have locked in their designs with older software and firmware. However, this software is no longer supported by technical support. Please be aware that in many cases, old software and new servo drives are not compatible because of differences in firmware. Contact technical support if attempting to replace drives that have old firmware with drives that have new firmware.

DriveWare® - For DigiFlex® Performance™ servo drives
DriveWare® 7.3.0 - released Mar 2015
Application software, manuals, and device description files
DriveWare® 7.2.2 - released Jun 2014
Application software, manuals, and device description files
DriveWare® 7.2.1 - released Apr 2014
Application software, manuals, and device description files
DriveWare® 7.1.2 - released Sep 2013
Application software, manuals, and device description files
DriveWare® 7.0 - released Jul 2012
Application software, manuals, and device description files
DriveWare® 5.8.5 - released Jan 2009
Application software and manuals
DriveWare® 5.4.2 - released Jun 2008
Application software and manuals
DriveWare® 4.6.4 - released Sep 2007
Application software and manuals
DriveWare® 4.0 - released Mar 2007
Application software and manuals
DriveWare300 - For 300 series servo drives
DriveWare300 3.1.5 - released Oct 2006
Application software and manuals
DriveWare300 3.1.4 - released Oct 2006
Application software and manuals
DriveWare300 3.0.3 - released Jun 2006
Application software and manuals
DriveWare300 1.4.0 - released Dec 2005
Application software and manuals
DDW - For 200 series and DX series CANopen servo drives
DDW 2.57 - released Jun 2005
Application software and manuals
DDW 2.49 - released 2002
Application software and manuals
DriveSuite - For 100 series RS232 and SynqNet servo drives
DriveSuite 3.7.6 - released Apr 2007
Application software and manuals
DriveSuite 3.1.3 - released Nov 2003
Application software and manuals