Power Supplies
ADVANCED Motion Controls has a variety of power supplies to power your servo drive. Sizes range from 300W continuous to over 35kW peak power. Selecting the correct power supply is as simple as specifying the correct voltage and picking a model that can supply enough power.
In addition to voltage and power, isolation is a very important consideration. For safe and reliable operation, either the drive or the power supply must have isolation. In the drive, isolation takes the form of optical isolators that isolate the signal ground from the power ground. In the power supply, isolation takes the form of an isolation transformer that isolates the input AC from the power supply output.
If the drive datasheet does not specify optical isolation then you must use a power supply with an isolation transformer.
- PS300
- PS2X3 and PS4X3
- PS16
- PS16-L
- PS30A
- PS50A
- Overview
- Downloads & Support
PS300 Series |
PS300W170 |
|
Model Number |
AC Input Supply(VAC) |
DC Output Voltage (VDC) |
Output Current (A) |
Output Power (W) |
Isolated Ground |
|---|---|---|---|---|---|
| < sort > | |||||
| {Model} | {InputVoltageACHigh} | {OutputVoltageDC} | {Cont_Current} | {Cont_Power} |
PS2X Series |
PS4X Series |
|
Model Number |
AC Input Supply(VAC) |
DC Output Voltage (VDC) |
Output Current (A) |
Output Power (W) |
Isolated Ground |
|---|---|---|---|---|---|
| < sort > | |||||
| {Model} | {InputVoltageACHigh} | {OutputVoltageDC} | {Cont_Current} | {Cont_Power} |
PS16 Series |
PS16L170 |
|
Model Number |
AC Input Supply(VAC) |
DC Output Voltage (VDC) |
Output Current (A) |
Output Power (W) |
Isolated Ground |
|---|---|---|---|---|---|
| < sort > | |||||
| {Model} | {InputVoltageACHigh} | {OutputVoltageDC} | {Cont_Current} | {Cont_Power} |
PS16-L Series |
PS16L170-L |
|
Model Number |
AC Input Supply(VAC) |
DC Output Voltage (VDC) |
Output Current (A) |
Output Power (W) |
Isolated Ground |
|---|---|---|---|---|---|
| < sort > | |||||
| {Model} | {InputVoltageACHigh} | {OutputVoltageDC} | {Cont_Current} | {Cont_Power} |
PS30 Series |
|
Model Number |
AC Input Supply(VAC) |
DC Output Voltage (VDC) |
Output Current (A) |
Output Power (W) |
Isolated Ground |
|---|---|---|---|---|---|
| < sort > | |||||
| {Model} | {InputVoltageACHigh} | {OutputVoltageDC} | {Cont_Current} | {Cont_Power} |
PS50 Series |
|
Model Number |
AC Input Supply(VAC) |
DC Output Voltage (VDC) |
Output Current (A) |
Output Power (W) |
Isolated Ground |
|---|---|---|---|---|---|
| < sort > | |||||
| {Model} | {InputVoltageACHigh} | {OutputVoltageDC} | {Cont_Current} | {Cont_Power} |
 |
|
|---|---|
ADVANCED Motion Controls power supplies are unregulated DC supplies that derive their power from an AC source. | |
Input Voltage |
120AC 1Φ 240AC 1Φ 240AC 3Φ |
Output Voltage Range |
30 - 340VDC |
Isolated Ground |
Compatibility with servo drives - With systems that derive their power from a floating source (such as AC power from the wall) the AC source needs to be isolated from the signal ground on the servo drive. This isolation can be achieved in either the power supply (via an isolation transformer) or the servo drive (via built in optical isolation). Therefore if you select a non-isolated power supply, you must verify that your servo drive has built-in isolation. |
