Hardware

Installation Notes (Section G)

Installation, setup, and tuning instructions for AMC amplifiers with a focus on analog drives.

Wiring Practices

Wiring recommendations to increase machine reliability and reduce electrical noise.

Connector Information

Part numbers and descriptions for replacement connectors not sold at AMC

Engineering

Engineering Notes (Section G)

General servo motion and servo amplifier engineering reference.

EMI Prevention

White paper that describes various noise paths and how to eliminate them.

Interfacing with ±10V command signals

Impedance matching explanation and recommendations

Drive Identification

Know the Code

Interpreting ADVANCED Motion Controls part number labels

Agency Approvals

Click to see if your drive is compliant. US and Canadian safety compliance with UL 508c, the industrial standard for power conversion electronics. UL registered under file number E140173. Machine components compliant with UL are considered UL registered as opposed to UL listed as would be the case for commercial products.

Click to see if your drive is compliant. European CE for both the Class A EMC Directive 89/336/EEC on Electromagnetic Compatibility (specifically EN 61000-6-4:2001, EN 61000-6-2:2001, EN 61000-3-2:2000, and EN 61000-3-3:1995/A1:2001) and LVD requirements of directive 73/23/EEC (specifically EN 60204-1), a low voltage directive to protect users from electrical shock.

Click for more information. Process Quality compliance with ISO 9001:2000 standards.

Click to see if your drive is compliant. RoHS (Reduction of Hazardous Substances) is intended to prevent hazardous substances such as lead from being manufactured in electrical and electronic equipment.