DPPANIU-020B080
Panel Mount
DigiFlex Performance
Product Status: Active
Specifications
Current Continuous (A) 10
Current Peak (A) 20
DC Supply Voltage (VDC) 20 - 80
Network Communication Ethernet POWERLINK, Ethernet, Modbus TCP
Size (mm) 166.7 x 87.8 x 35.9
Weight (g) 496
The DPPANIU-020B080 DigiFlex® Performance panel mount servo drive offers full tuning control of all servo loops and is designed for distributed or centralized servo systems. This motor controller utilizes POWERLINK, Modbus TCP, or Ethernet communication and is commissioned with DriveWare® via a USB interface.
CONTROL/COMMAND
- ±10 V Analog
- Encoder Following
- Indexing
- Jogging
- Over the Network
- Sequencing
PRIMARY FEEDBACK
- ±10 VDC Position
- 1Vp-p Sine/Cosine Encoder
- BiSS C-Mode
- EnDat® 2.1
- EnDat® 2.2
- Halls
- Hiperface®
- Incremental Encoder
- Tachometer (±10 VDC)
OPERATING MODE
- Profile Modes
- Cyclic Synchronous Modes
- Current
- Position
- Velocity
MOTOR TYPE
- Three Phase (Brushless)
- Single Phase (Brushed)
- AC Induction
- Stepper
PRODUCT DOWNLOADS
DPPANIU-020B080 Datasheet
Zipped folder containing STP, IGS, SLDPRT, STL, and 3D PDF models.
- DP Panel Mount (POWERLINK) HW Installation Manual Installation of DigiFlex® Performance™ POWERLINK / Modbus TCP /
- Ethernet Communication Manual (DP) Ethernet Communication and Command Dictionary for DigiFlex® Performance™ servo drives
- Modbus Communication Manual (DP) Modbus Communication and Register Definitions for DigiFlex® Performance™ servo drives
- POWERLINK Communication Manual (DP) POWERLINK Communication and Object Dictionary for DigiFlex® Performance™ servo drives
- POWERLINK XDD File POWERLINK XDD device description file
- Product Identification Determine the part number, serial number and version of your product
- DriveWare® 7 Quick Reference Quick start-up guide for DriveWare® 7
- DriveWare® 7 Release Notes Release notes for latest version of DriveWare® 7 software
- DriveWare® 7 Software Configuration software for DigiFlex® Performance™ digital servo drives
- DriveWare® 7 User Manual User Manual for DriveWare® 7 software
- App Note 001 Performance and benefits comparison between CANOpen, RS232
- App Note 003 DigiFlex® Performance™ Drive Peak Current Recovery
- App Note 023 Ferrite Recommendations
- App Note 027 Motion Engine, configure internal motion generator for indexing and sequences
- App Note 028 Mode Switching, hot switch between modes and gain settings for select digital drives
- App Note 030 AC Induction Current Loop Tuning
- App Note 034 Programmable Limit Switch (PLS) Examples
- App Note 035 Sequencing Overview and Examples
- App Note 037 Stepper Motor Setup Process
- App Note 039 Connectivity Between Dynomotion and ADVANCED Motion Controls' Servo Drives
- App Note 040 Absolute Feedback Configuration
- App Note 041 DigiFlex® Performance™ Drives in High-Speed Applications
- App Note 050 Troubleshooting USB and RS232 Connection Issues
- DriveWare® 7 AutoCommutation Commutate a brushless motor using the DriveWare® 7 Autocommutation feature
- DriveWare® 7 Current Loop Tuning Tune the current loop on DigiFlex® Performance™ servo drives
- DriveWare® 7 Overview Basic overview of DriveWare® 7 configuration software
- Outer Loop Tuning Configuring Position around Velocity and Position around Current with a DigiFlex® Performance™ Servo Drive
- Proper Wiring Practices Tips for Proper Wiring and Reducing EMI (Noise)
- CE CE for both Class A Electromagnetic Compatibility and LVD
- ISO 9001 Process Quality compliance with ISO 9001:2015 standards
- POWERLINK POWERLINK Certificate Number 10500138 for DigiFlex® Performance™
- REACh Regulation, Evaluation and Authorization of Chemicals
- RoHS III RoHS (Reduction of Hazardous Substances)
- UL UL file number E140173 for US and Canadian safety compliance
- CMRT Declaration for Conflict Mineral Reporting
Thank You For Requesting Access
To view the requested file, please click the button below.
Begin Download